Cleaner options
Control of rotating Tornado nozzles or fixed Power nozzles
Compressed air consumption may be considerably reduced if only those nozzles are activated that are situated above the bore holes or the recesses. The nozzles may be controlled via manual valves or via electrical magnetic valves. If the latter is the case, oftentimes it is a good idea to create signals from the existing drilling and milling programmes to determine which particular nozzle needs to be activated.
Compressed air consumption may be considerably reduced if only those nozzles are activated that are situated above the bore holes or the recesses. The nozzles may be controlled via manual valves or via electrical magnetic valves. If the latter is the case, oftentimes it is a good idea to create signals from the existing drilling and milling programmes to determine which particular nozzle needs to be activated.
Cleaning of edges
Two Sword Brush modules may be integrated at the infeed of the Cleaner to clean the edges of the boards. One of these two Sword Brushes can be adjusted so that boards with different widths can be cleaned.
Two Sword Brush modules may be integrated at the infeed of the Cleaner to clean the edges of the boards. One of these two Sword Brushes can be adjusted so that boards with different widths can be cleaned.
Cleaner on wheels
For maintenance purposes, it is oftentimes convenient to laterally remove the Cleaner from the working position. In this case special wheels can be supplied.
Transport roller extension
Additional transport rollers are available and may be installed at the infeed or the outfeed of the Cleaner to adapt the machine to existing gaps between two conveyor systems.
Additional transport rollers are available and may be installed at the infeed or the outfeed of the Cleaner to adapt the machine to existing gaps between two conveyor systems.
Double panel feed prevention
If two panels arrive at the infeed one on top of the other, this device mechanically protects the upper cleaning module.
If two panels arrive at the infeed one on top of the other, this device mechanically protects the upper cleaning module.
Guide plates - guide elements
Guide plates ensure a safe material threading, especially for foils.
Guide plates ensure a safe material threading, especially for foils.
Ingromat supply
Ingromat supply for a Cleaner may either be realised with an integrated membrane pump or by connecting the Cleaner to a central supply system. The Ingroamt(tm) is available in 30 or 1000 litres containers.
Ingromat supply for a Cleaner may either be realised with an integrated membrane pump or by connecting the Cleaner to a central supply system. The Ingroamt(tm) is available in 30 or 1000 litres containers.
