Cleaner types

Ingromat-Cleaner CF 05/A
with cleaning module BIT 140/3/A and electrical height adjustment

Ingromat-Cleaner CM 05/A
with cleaning module BIT 140/3/A, but without electrical height adjustment

Features:

1. 4 linear brushes Tresy, wiping direction from edge to edge, upper and lower brushes wipe in opposite directions
2. High-Speed-Channel for a compressed air driven pre-clean

Suitable for the cleaning of:

1. Flat surfaces / boards (thickness > 3 mm)
2. Floor laminates
3. Furniture parts
4. Panels
5. Minimum length of parts: 200 mm

Sword Brush Cleaners CF 05/A
with cleaning module BIQ 247/3/A and electrical height adjustment

Features:

1. 4 linear brushes Quadro, wiping direction from edge to edge, upper and lower linear brushes wipe in opposite directions
2. Additional transport roller between the two pairs of cleaning modules

Suitable for the cleaning of:

1. Narrow laminate floors, minimum part length = 100 mm
2. Furniture parts
3. Panels

Ingromat-Cleaner CVT 05/A
with cleaning module BIT 140/1/A

Ingromat-Cleaner CVB 05/A

with cleaning module BIT 140/1/A

Merkmale:

1. 2 linear brushes Tresy, wiping edge to edge
2. Material transport via combined vacuum-transport roller conveying system
3. 2 Cleaners are necessary for a double-sided cleaning:
    CVB: cleaning of lower product surface
    CVT: cleaning of upper product surface

Suitable for the cleaning of:

1. Extremely narrow boards
   Minimum part length = 65 mm
2. Laminat floors
3. Furniture parts
4. Panels

Ingromat-Cleaner CF 05/A
with cleaning module BIT 140/4/A

Features:

1. 4 linear brushes Tresy, wiping from the centre to the edges of the boards, upper and lower brushes wipe in the same direction
2. High-Speed-Channel for a compressed air driven pre-clean

Suitable for the cleaning of:

1. Blanks
2. Printed circuit boards
3. Formats
4. Foils
5. Very thin materials

Ingromat-Cleaner CF 05/A
with cleaning module BIT 140/3/A 
Tornado-Channel TKR 05/2

Features:

1. 4 linear brushes Tresy, wiping edge to edge, upper and lower linear brushes wipe in opposite directions
2. Tornado Channel TKR 05/2 for the compressed air driven pre-clean with rotating nozzles

Suitable for the cleaning of:

1. Structured surfaces
2. Furniture parts after milling

Ingromat-Cleaner CF 05/A
with cleaning module BIT 140/3/A
Tornado-Channel TKF 05/2

Features:

1. 4 linear brushes Tresy, wiping from edge to edge, upper and lower linear brushes wipe in opposite directions
2. Tornado Channel TKF 05/2 for the compressed air driven pre-clean with fixed nozzles

Suitable for the cleaning of:

1. Surfaces with grooves and bore holes from above